PK-Green Stuff Bar 100g - 2-Component-Epoxy-Putty

2 x 50g Green Stuff as a roll.
Green Stuff is a 2-component modeling clay that is ideal for filling gaps in miniatures and modeling additional details in a model. It can also be used for the conversion and modification of miniatures and models. The adhesive properties of the blended (kneaded) components facilitate the bonding of materials. It can be mixed with other modeling compounds, e.g. Magic Sculp, can be mixed to combine and change the shape properties and the final hardness.

After the two differently colored components have been kneaded together, a malleable modeling compound is formed, which cures at room temperature. Green Stuff is suitable for both plastic and resin as well as metal models. It can be easily shaped with modeling tools. After it is completely cured, it can be cut, sanded and glued to other components (tin, plastic, resin) and painted with paint.

Cut some of the yellow and blue streaks, knead these two pieces well until the mixture turns green and sticky. After mixing, you have about 90 minutes to model and set details, time. The maximum hardness is reached after 24 hours. By changing the proportions of the components yellow / blue, a faster / slower curing or a greater or smaller degree of hardness can be obtained. Since the combined mass of resin and hardener sticks, we recommend a release agent for the modeling tool used, thus also smoother surfaces can be obtained. Normally you take enough water, but some sculptors also use a bit of oil, Vaseline or Jonson oil. Keep tools moisturized. By adding talcum powder, the texture of the resin can be easily changed, as well as avoid fingerprints.
Storage: We recommend storing the Green Stuff in a cool place or even storing it in the fridge.